Loading ...
Loading ...
Loading ...
• Right Front Turn Signal Light Out
• Right Rear Turn Signal Light Out
• Park Assist Disabled
• Service Park Assist System
• Personal Settings Not Available — Vehicle Not In Park
• Blind Spot System Off — This message is displayed
when the ignition is turned to ON to indicate the Blind
Spot System has been turned off.
•
Blind Spot System Not Available — This message is
displayed to indicate the Blind Spot Monitor (BSM) sys-
tem is temporarily unavailable due to sensor blockage,
electronic interference, or other ⬙temporary⬙ conditions.
When this message is displayed, both outside rear view
icons will be illuminated. If electronic interference is
present, the BSM system will illuminate the icon only on
the side of interference as long as interference is present.
•
Service Blind Spot System — This message is displayed to
indicate the Blind Spot Monitor (BSM) system is perma-
nently unavailable. The driver will receive an instrument
cluster display message and the BSM display warning in
both mirrors will be permanently illuminated. If this
message is present, see an authorized dealer.
Oil Change Required
Your vehicle is equipped with an engine oil change indi-
cator system. The Oil Change Required message will
display in the instrument cluster display for approximately
10 seconds, after a single chime has sounded, to indicate
the next scheduled oil change interval. The engine oil
change indicator system is duty-cycle based, which means
the engine oil change interval may fluctuate dependent
upon your personal driving style.
Unless reset, this message will continue to display each
time you turn the ignition to the ON/RUN position. To
turn off the message temporarily, push and release the
BACK button. To reset the oil change indicator system
(after performing the scheduled maintenance) refer to the
following procedure.
Vehicles Not Equipped With Keyless Enter-N-Go
1. Turn the ignition to the ON/RUN position (do not start
the engine).
2. Fully press the accelerator pedal, slowly, three times
within 10 seconds.
3. Turn the ignition to the OFF/LOCK position.
262 UNDERSTANDING YOUR INSTRUMENT PANEL
Loading ...
Loading ...
Loading ...