Loading ...
Loading ...
Loading ...
The correct temperature
79
Setting the temperature
Touch the sensor control to set the
temperature.
The previously set temperature will
appear.
Use the and sensor controls to
set the temperature. Keeping your
finger on the sensor control changes
the temperature continuously.
Confirm the temperature setting with
OK or wait approx. 8seconds after
the last touch of the sensor. This
temperature will be automatically
adopted.
Tip: The new temperature setting can
also be confirmed and adopted by
closing the appliance door.
The temperature display always shows
the required temperature.
If you have adjusted the temperature,
wait for approximately 6hours if the
appliance is not very full and for
approximately 24hours if the
appliance is full before checking the
temperature display. It will take this long
for an accurate reading to be given.
If, after this time, the temperature is
still too high or too low, adjust it
again.
Adjusting the temperature in the dry
compartment of the MasterFresh
zone
The temperature in the dry
compartment of the MasterFresh zone
is maintained at approx. 32°F (0°C).
However, if you would like it to be
warmer or colder, you can adjust the
temperature slightly (see “Selecting
additional settings – Adjusting the
temperature in the MasterFresh zone
(dry compartment)”).
Tip: You can select a lower setting for
storing, for example, particularly
delicate fish. A slightly higher
temperature is preferable for storing
ready-to-eat food, for example.
Temperature range
The temperature in the refrigerator
section can be set between 36°F (2°C)
and 46°F (8°C).
The temperature in the dry
compartment in the MasterFresh zone
can be set between 30°F (-1°C) and
37°F (3°C).
Loading ...
Loading ...
Loading ...