Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
30
Pushing the appliance into the niche
Then push the appliance into the
niche, taking care not to damage the
electrical connection!
If you are installing several
refrigeration appliances side by side,
now secure the appliances to one
another (see the installation
instructions for the side-by-side
installation kit).
To ensure that the refrigeration
appliance can then be aligned
correctly, the toe-kick ventilation grille
must be removed from the appliance
toe-kick:
Carefully guide a flat-head
screwdriver through the toe-kick
ventilation grille on both sides and
use it to push the internal plastic
latches outwards to release the toe-
kick ventilation grille.
Place the toe-kick ventilation grille to
one side.
Affix edge protection to the
adjacent cabinet fronts.
Insert the plug connector at the back
of the refrigeration appliance (see
“Installation – Electrical connection”).
Insert the plug into the electrical
socket.
The electrical socket must be close
to the refrigeration appliance and
easily accessible.
Risk of damage due to electrical
overload.
If the refrigeration appliance is
electrically overloaded, this can
cause a short circuit and thus
damage your refrigeration appliance.
When you install appliances side by
side, each refrigeration appliance
must have its own separate electrical
socket.
Tip: Secure the power cord to prevent it
from becoming caught by tying a piece
of string to the middle of the cord and
as the refrigeration appliance is being
pushed into the niche, pull the cord
forward underneath the appliance.
Loading ...
Loading ...
Loading ...