Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
15
Load-bearing capacity of the niche
floor
To ensure the safe installation of the
refrigeration appliance and to guarantee
its correct functioning, the floor of the
niche where the appliance is to be
installed must be smooth and even.
It must be made from strong, rigid
material.
Because the refrigeration appliance is
extremely heavy when fully loaded, it is
essential that the floor it stands on is
able to bear its weight. If necessary,
seek the advice of an architect or
construction expert.
When fully loaded, the weight of the
refrigeration appliance is approx.:
K 2601 Vi, K 2611 Vi 717 lbs
(325 kg)
K 2801 Vi, K 2811 Vi 838 lbs
(380 kg)
K 2901 Vi, K 2911 Vi 988 lbs
(448 kg)
Ventilation
Risk of fire and damage due to
insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the
compressor will run more frequently
and for longer periods.
This causes increased energy
consumption and an increased
compressor operating temperature,
which can result in damage to the
compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
Do not block the ventilation gaps.
The ventilation gaps must never be
obstructed.
Door hinge
Risk of damage and injury when
changing the door hinges.
Changing the door hinges single-
handedly can cause damage to the
appliance and injury.
The refrigeration appliance is
supplied with a fixed hinge. On no
account should you attempt to
change the door hinge yourself.
If you need to change the door hinge
to the other side, please contact the
Technical Service department.
Loading ...
Loading ...
Loading ...