Loading ...
Loading ...
Loading ...
ENGLISH
5
reachable socket.
• Provide for a minimum distance from the sides of the machine as
shown in the illustration
.
• While switching on or o the machine, we suggest placing an empty
glass under the dispensing spout.
Do not keep the machine at temperatures below 0°C. Frost may damage
the machine. Do not use the co ee machine outdoors.
In order to prevent its housing from melting or being damaged, do not
place the machine on very hot surfaces and close to open ames.
Storing the Machine - Cleaning
Before cleaning the machine, turn it o by pressing the " " button and
then by switching the power button to "0". Finally, remove the plug from
the socket.
Keep the machine at its best, clean and store it properly.
Since the machine uses natural ingredients to brew beverages (co ee
beans, water, milk, etc.), some residues of ground co ee or condensed wa-
ter could be present on its supporting surface. For this reason we recom-
mend to periodically clean both the visible parts of the machine and the
area beneath it.
Before storing the machine we strongly recommend to clean it:
- Water left in the tank and/or the water circuit for several days should
not be consumed. If the machine is going to remain inactive for a long
time, dispense water from the hot water wand and carefully clean the
Cappuccinatore (if supplied).
- Turn o the power button and clean the machine. Finally, remove the
plug from the socket. Wait for the machine to cool down.
Never immerse the machine in water! Store it in a dry place, out of the
reach of children. Keep it protected from dust and dirt.
It is strictly forbidden to tamper with the internal parts of the machine.
For thorough cleaning, the Cappuccinatore can be detached and disassem-
bled and its parts can be put in a dishwasher (not professional type).
The washing process in the dishwasher may cause the surface of the Cap-
puccinatore parts to tarnish or the graphics to fade, especially if aggressive
detergents are used.
This is a normal phenomenon and does not a ect in any way the correct
operation of the milk system.
Malfunction
In case of failure, problems or a suspected fault resulting from the falling of
the machine, immediately remove the plug from the socket. Never attempt
to operate a faulty machine.
For further information on troubleshooting and service, please refer to the
"Troubleshooting" and "Service" chapters.
Fire Safety Precautions
In case of re, use carbon dioxide (CO
2
) extinguishers. Do not use water or
dry powder extinguishers.
Loading ...
Loading ...
Loading ...