Loading ...
Loading ...
Loading ...
58
ENGLISH
Help Message Displayed How to Reset the Message
The machine requests a descaling cycle.
When this message is displayed, it is still possible to use the ma-
chine, but its correct operation might be a ected.
Damages caused by failure to descale the machine are not cov-
ered by warranty.
The machine requests the "Intenza" water lter to be replaced
with a new one. Replace the lter as described on page 14.
The alarm is displayed only if the "Enable Filter" function is set to
"ON". (see page 37).
The machine reminds that after a few cycles it will be necessary to
empty the co ee grounds drawer.
This message does not prevent the machine from brewing some
more products.
EMPTY COFFEE
GROUNDS DRAWER
Remove the co ee grounds drawer and empty the co ee
grounds into a suitable container.
Note: The co ee grounds drawer must be emptied only when the
machine asks for it and with the machine turned on. If you empty
the drawer with the machine turned o it will not record the
emptying operation.
Blinking red light. Machine in Stand-by.
The Stand-by settings can be changed (see page 36).
Press the "
" button
RESTART TO SOLVE
An event has occurred which needs the machine to be restarted.
Take note of the code (E xx) shown at the bottom.
Turn o the machine, wait for 30 seconds and then turn it on
again. If the problem persists, contact the service centre.
DESCALING
NEEDED.
DESCALE?
DESCALING
If this page is displayed after starting the machine, this means
that the descaling cycle is needed.
Press the "
" button to enter the descaling menu and refer to
the relevant section.
Press the "
" button to go on using the machine.
We remind you that damage caused by failure to descale the
machine are not covered by warranty.
Loading ...
Loading ...
Loading ...