Loading ...
Loading ...
Loading ...
ENGLISH
19
Eco-friendly: Stand-by
The machine is designed for energy saving. The machine automatically
turns o after 30 minutes of inactivity.
Note:
- During the turning o phase, the machine performs a rinse cycle, if a cof-
fee product has been brewed.
- Time can be programmed according to your needs (see page 36).
To turn on the machine again, simply press the "
" button (if the power
button is set to "I"). In this case the machine will perform the rinse cycle
only if the boiler is cold.
Adjusting the Dispensing Spout
Most cups on the market can be used with this co ee machine.
The height of the dispensing spout may be adjusted to better t the
dimensions of the cups that you wish to use.
Manually move the dispensing spout up or down to adjust its height.
Brewing Co ee
Before brewing co ee check the lights on the display and make sure the
water tank and co ee bean hopper are full.
Before brewing co ee, adjust the height of the dispensing spout according
to your needs and select the aroma by using the adjustment lever; other-
wise, select the pre-ground co ee.
Cup-warming Surface
The machine features a cup-warming surface to keep your cups warm and
ready. Warm cups bring out the full aroma of co ee and let you enjoy its
taste in full.
Place the cups that you usually use and wait until they are warm.
Note: The cup-warming surface has a higher temperature than the other
machine surfaces, so we recommend not to touch it with sensitive body parts
to avoid irritations.
Using the cup-warming surface for other purposes is prohibited.
The cup-warming surface is disabled by default for energy saving pur-
poses. Refer to page 36 of the manual to activate it.
Loading ...
Loading ...
Loading ...