Loading ...
Loading ...
Loading ...
65
TROUBLESHOOTING AND MAINTENANCE
5
Image quality problems
Problem Cause and solution Page
Copies are too dark or too light.
The image of the original is too light or too dark.
→ Select the correct original image type in the exposure setting and
adjust the copying exposure.
29
The copying exposure is set to "AUTO".
→ The "EXPOSURE ADJUSTMENT" key operator program can be
used to adjust the exposure level used for "AUTO" exposure.
Consult the administrator of the machine.
Key
operator’s
guide
The original type that is most suitable for the original
has not been selected in the copy exposure setting
screen.
→ Change the original type selection to "AUTO", or manually select
the most suitable original type setting.
29
Text is not clear in a copy.
The correct original type has not been selected in the
copy exposure setting screen.
→ Change the original type setting to "TEXT".
29
Part of the copied image is cut off.
The original was placed in the wrong position.
→ Place the original in the correct position. When using the
document glass, place the original against the far left side.
22, 23
A suitable ratio for the original size and paper size has
not been selected.
→ Use auto ratio selection to obtain the correct ratio for the copy.
30
The tray’s paper size setting was not changed when a
different size of paper was loaded in the tray.
→ Be sure to change the tray’s paper size setting when loading a
different size of paper in the tray.
19
An AB paper size is being used.
→ When using copy paper that is an AB size, set the original size
manually.
47
Blank copies.
The original is not placed face up in the RSPF or face
down on the document glass.
→ Place the original face up in the RSPF or face down on the
document glass.
22, 23
Paper is wrinkled or the copied
image comes off when the paper
surface is rubbed.
The paper is outside of the specified size and weight
range.
→ Use copy paper within the specified range.
15
The paper type setting is not correct.
→ Set the correct paper type. To set the paper type for a tray, see
"CHANGING A TRAY’S PAPER TYPE AND PAPER SIZE
SETTINGS".
19, 20
Paper is curled or damp.
→ Do not use curled or wrinkled paper. Replace with dry copy
paper. During periods when the machine is not used for a long
time, remove the paper from the tray and store it in a dark place
in a bag to prevent moisture absorption.
81
Copies are smudged or dirty.
The document glass or the underside of the RSPF is
dirty.
→ Clean regularly.
77
The original is smudged or blotchy.
→ Use a clean original.
-
White or black lines appear copies.
The scanner glass for the RSPF is dirty.
→ Clean the long, narrow scanning glass.
77
!Andromeda_copy_sec.book 65 ページ ２００６年１１月２３日 木曜日 午後６時１分
Loading ...
Loading ...
Loading ...