Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas supplies before servicing. Check appliance is safe when you have nished.
41
6.4 To Replace the Main Oven Door Outer Panel
Move the cooker forwards to gain access to the sides.
Open the oven door slightly and remove the 4 front
panel xing screws from the door sides (2 each side),
(Fig.9-13). Carefully lift o the outer door panel.
Remove the door handle from the panel by unscrewing
the 2 retaining nuts.
Fit the door handle to the new panel.
Fit the panel to the door. Reassemble in reverse order.
6.5 To Change the Oven Door Latch
Remove the main oven door outer panel (see 6.4).
Remove screws ‘B’, which hold the latch assembly to
the inner door panel (Fig.9-14). Fit the new catch and
reassemble in reverse order. Check the door operation.
6.6 To Adjust the Oven Door Catch Keep
Open the oven door, slacken o the locknut at the base
of the keep, and screw in or out as required until the
required t is obtained. Retighten the locking nut
(Fig.9-15).
6.7 To Change an Oven Door Seal
Open the oven door. The seal is held in place by small
hooks on the rear face. At the corner, pull the seal
diagonally away from the door centre until that hook
is released (Fig.9-16). Proceed to the next hook and
release it in a similar way, and so on. Use force if the
hooks are sti, as the old seal will be discarded.
When tting the new seal, position the seal join at the
bottom. Hook the new seal in one of the corner holes of
the door, and proceed round the door, snapping in each
hook in turn.
6.8 Oven Door Glass
The glass on the oven doors is not replaceable.
ArtNo.320-0005 Oven door rubber seal
Fig.9-16
ArtNo.320-0002c
- Oven door side screws (Elan)
Fig.9-13
ArtNo.320-0003 Oven door latch
B
Fig.9-14
ArtNo.320-0004 Oven door keep
Fig.9-15
Loading ...
Loading ...
Loading ...