Loading ...
Loading ...
Loading ...
26
INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
3 pan supports Wok cradle
ArtNo.110-0002 110 pan supports
ArtNo.000-0009 Wok ring, cast
Griddle Grill pan and trivet
ArtNo.330-0001 - Grill pan
3 at shelves 1 drop shelf
Handyrack Roasting tin
ArtNo.324-0003 Handyrack
ArtNo.324-0004 Roasting tin
2-piece plinth Splashback
ArtNo.350-0012 - splashback
1 large and 4 small handles Stability bracket
ArtNo.210-0014 - Classic handles
Restraining chain & hook
ArtNo.020-0021 - Restraining
chain & hook
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use
for any other purpose could invalidate any warranty or
liability claim.
Note: An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
Conversion
All models are supplied set for use on Natural gas. A
conversion kit for Propane gas is included with the appliance.
After converting the appliance, please attach the Gas
Conversion sticker over the appropriate area of the data
badge – this will identify the gas type for which the appliance
is now set.
You will need the following equipment to complete the
cooker installation satisfactorily:
• Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted.
These are not supplied with the cooker but are
available at most builders’ merchants.
• Gas pressure tester/manometer.
• Flexible gas hose: Must be in accordance with the
relevant standards.
• Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2. Masonry drill bit (only required if tting the cooker on a
stone or concrete oor)
3. Wall plugs (only required if tting the cooker on a stone
or concrete oor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. Spirit level
8. Pencil
9. Adjustable spanner
10. Screws for tting stability bracket
11. 13 mm spanner or socket wrench
Checking the parts:
Loading ...
Loading ...
Loading ...