Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
38
fan blade and remove the centre nut (left-hand thread) two
brass washers, fan blade and circlip. Unscrew the fan retaining
nuts and washers (three o each) and lift the fan away from
the rear of the cooker. Fit the new fan and reassemble in
reverse order.
Check the operation of the oven.
6. Doors
6.1 To Remove the Grill Door
Remove the left-hand side panel (see 1.2). Remove the control
panel (see
1.1). Remove the centre cover strip (5 screws, 2 top,
2 bottom, 1 in middle). Remove the two countersunk screws (1
each side) securing the grill hinge arms to the front of the grill
chamber.
Note: The arms are spring tensioned. Carefully remove the grill
door. Retain the gaskets.
Reassemble in reverse order, ensuring that the gasket is tted
between the hinge arm and the front of the grill chamber.
Remove the two screws and washers securing the grill
element front support. Remove the screws from the grill
element. Lift the element out carefully, disconnecting the
leads from the element terminals (noting their position). If
it is not possible to disconnect the leads in this way, pull the
cooker forward to gain access to the rear, remove the screws
securing the electric cover to the back sheet, remove the cover
and disconnect the terminals from the rear.
Fit the new element and reassemble in reverse order. Check
the operation of the grill.
6.2 To Replace an Oven Door
Open the oven door. Support the door and remove the two
screws securing the upper hinge and gasket to the cooker
front (Fig. 9.4). Remove the door from the lower hinge by
lifting slightly and moving outwards (Fig. 9.5).
The door is heavy, so take care.
Reassemble in reverse order.
6.3 To Adjust an Oven Door Angle
The bottom hinge of either oven door can be adjusted to alter
the angle of the door (Fig. 9.6). Loosen the bottom hinge xing
screws and use the notch and a at bladed screwdriver to move
the position of the hinge to set the hinge position (Fig. 9.7).
Retighten the hinge screws.
6.4 To Replace the Main Oven Door Outer Panel
Move the cooker forward to gain access to the sides.
Open the oven door slightly and remove the front panel xing
screws from the door sides – two each side
(Fig. 9.8).
Carefully lift o the outer door panel.
Remove the door handle from the panel by unscrewing the
two retaining nuts. Fit the door handle to the new panel. Fit
the panel to the door. Reassemble in reverse order.
ArtNo.320-0002a Proplus oven door side screws
ArtNo.320-0007 Oven door hinge adjustment 2
ArtNo.320-0006 Oven door hinge adjustment 1
Eect of hinge adjustment – exagerrated for clarity
Centreline of hinge pin
Oven door omitted for clarity
ArtNo.320-0001 Door hinges
1
ArtNo.320-0001 Door hinges
2
Fig. 9.4 Fig. 9.5
Fig. 9.6
Fig. 9.7
Fig. 9.8
Loading ...
Loading ...
Loading ...