Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
37
Element fixing screws
ArtNo.321-0005 Fan oven element
ArtNo.320-0020 Oven back fixing screws
Fig. 9.2
Fig. 9.3
5. Ovens
5.1 To Replace an Oven Thermostat
Disconnect from the electricity supply.
Lift the ceramic hob and remove the control panel (see
1.1 &
2.1). Open the oven door. Remove the oven furniture.
For the right-hand oven, remove the thermostat phial cover
(two screws). Unclip the thermostat phial from the clips in the
oven back.
For the left-hand oven, pull cooker forward to gain access
to the cover box at the rear of the cooker. Remove the four
screws securing the cover and lift clear.
Feed the thermostat capillary out of the oven. Disconnect
the wiring from the thermostat. Remove two screws holding
thermostat to mounting panel. Fit new thermostat and
reassemble in reverse order. Make sure that the phial is clipped
to the oven back with the phial centrally positioned between
the clips.
Check the operation of the thermostat.
5.2 To Remove an Oven Element Thermal Cut-out
Disconnect from electricity supply.
Pull the cooker forward to gain access to the cover box. Undo
the cover screws and lift clear. The cut-out is located on the
earth plate beside the oven element connections. Disconnect
the cut-out wiring. Undo the xings that secure the cut-out to
the earth plate and remove. Fit the replacement control and
re-assemble in reverse order.
5.3 To Remove an Oven Inner Back
Disconnect from electricity supply.
Open the door and remove the shelves. Remove the screws
and washers securing the inner back to the back of the oven
(Fig. 9.2). Carefully lift away the inner back. Reassemble in
reverse order making sure that the screws and washers are
fully tightened.
5.4 To Remove the Fan Oven Element
Disconnect from electricity supply.
Remove the oven inner back (see
5.3). Remove the two screws
from the top of the element and the one from the bottom of
the element inside the oven (Fig. 9.3).
Lift the element out carefully, disconnecting the terminals
connected to the element (noting their positions).
If it is not possible to disconnect the leads in this way, pull the
cooker forward to gain access to the rear.
Remove the screws securing the electric cover to the back
sheet, remove the cover and disconnect the terminals from
the rear.
5.5 To Replace an Oven Fan
Disconnect from electricity supply.
Pull the cooker forward to gain access to the rear. Remove
the screws securing the electric cover to the back sheet and
remove the cover.
Disconnect the three terminals connected to the fan noting
their position. Remove the oven inner back (see
5.3). Hold the
Loading ...
Loading ...
Loading ...