Loading ...
Loading ...
Loading ...
CVP-809/CVP-805 Owner’s Manual
50
Using the panel buttons
1-1
To select the keyboard part, press the VOICE [MAIN/LAYER/LEFT] button repeatedly
if necessary until the desired part’s lamp lights.
1-2 Press one of the desired VOICE category buttons to call up the Voice Selection display.
NOTE
• You can select Voices for the Main and Layer parts simply by using the Voice category selection buttons. While holding
down one of the Voice category selection buttons, press another Voice category selection button. The Voice
corresponding to the first pressed button is assigned to the Main part while the Voice of the second pressed button is
assigned to the Layer part.
• You can change the sub category by pressing the same Voice category button twice or more.
2 Tou ch the d e sired Voic e.
NOTE
The “Others” tab contains XG Voices and so on. For details about how to select those Voices, refer to the “VoiceSetting”
section in the Reference Manual on the website (page 9).
3 Make sure that the desired keyboard part is turned on.
The on/off setting for the keyboard part can be made as described in step 1-1 in “Touching the
display” above.
4 Play the keyboard.
To hear the characteristics of the Voices:
Touch (Demo) to start demo playback of the selected Voice. Touch (Demo) again to stop
playback.
Touch (Information) to call up the Voice Information window, which may or may not be available
depending on the Voice.
1-1 1-2
Loading ...
Loading ...
Loading ...