Loading ...
Loading ...
Loading ...
CVP-809/CVP-805 Owner’s Manual
126
Mixer
The sound seems strange or different than
expected when changing a rhythm Voice
(drum kit, etc.) of the Style or Song from the
Mixer.
When changing the rhythm/percussion Voices (drum kits, etc.) of the Style
and Song from the VOICE parameter, the detailed settings related to the
drum voice are reset, and in some cases you may be unable to restore the
original sound. You can restore the original sound by selecting the same
Song or Style again.
Pedal/AUX Pedal
The damper, sostenuto and soft functions do
not work for the relevant pedals.
The pedal cord plug is not connected to the pedal jack securely. Securely
insert the pedal cord plug into the proper jack (pages 115, 119, 122).
Make sure that each pedal is properly assigned to “Sustain,” “Sostenuto”
and “Soft” (page 38).
The on/off setting of the footswitch/foot
controller connected to the [AUX PEDAL] jack
is reversed.
Turn the instrument’s power off, then turn it on again without pressing the
footswitch/foot controller, or change the Polarity parameter from [Menu]
[Assignable] [Pedal].
The damper pedal does not function properly. The power of the instrument may have been turned on while the damper
pedal was pressed. Press and release the damper pedal to restore proper
operation.
Connection
The speakers do not switch off when a pair of
headphones is connected to the [PHONES]
jack.
The Speaker setting is “On.” Set the speaker setting to “Headphone
Switch” via [Menu] [Utility] [Speaker/Connectivity].
The Wireless LAN icon is not shown in the
Menu display even though the USB wireless
LAN adaptor is connected.
Disconnect the USB wireless LAN adaptor and connect it again.
The Bluetooth-equipped device cannot be
paired with nor connected to the instrument.
Check the Bluetooth function of the Bluetooth-equipped device is
activated. To connect the Bluetooth-equipped device and the instrument,
Bluetooth function of both devices need to be turned on.
The Bluetooth-equipped device and the instrument need to be paired to
connect each other via Bluetooth (page 105).
In case there is a device (microwave oven, wireless LAN device, etc.) that
outputs signals in the 2.4 GHz frequency band nearby, move this
instrument away from the device that is emitting radio-frequency signals.
Sound input to the [AUX IN] jack is
interrupted.
The output volume of the external device connected to the [AUX IN] jack
of this instrument is too low. Increase the output volume of the external
device. The volume level reproduced via this instrument’s speakers can
be adjusted by using the [MASTER VOLUME] control.
The Noise Gate function may be cutting the soft sounds. If this happens,
turn off the “AUX IN Noise Gate” parameter (page 104).
Loading ...
Loading ...
Loading ...