Loading ...
Loading ...
Loading ...
uuJump StartinguJump Starting Procedure
660
Handling the Unexpected
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■
What to Do After the Engine Starts
1What to Do After the Engine Starts
The indicators for the Adaptive Cruise Control
(ACC)
*
, Adaptive Cruise Control (ACC) with Low
Speed Follow
*
, Road Departure Mitigation (RDM),
Vehicle Stability Assist (VSA®) System, Vehicle
Stability Assist (VSA®) OFF, low tire Pressure/TPMS
*
and Collision Mitigation Braking System
TM
(CMBS
TM
)
may come on when you turn the ignition switch to
ON
(w
*1
after reconnecting a battery.
Drive a short distance at more than 12 mph (20
km/h). Each indicator should go off. If it does not,
have your vehicle checked by a dealer.
* Not available on all models
20 CIVIC 5D HUM (KA KC KL)-31TGG6300.book 660 ページ ２０１９年５月１４日 火曜日 午後７時５１分
Loading ...
Loading ...
Loading ...