User Manual - Page 186

For 2021 CONVERTIBLE.

Loading ...
Loading ...
Loading ...
Depending on the equipment version, the
system cannot be switched off manually if
the reverse gear is engaged.
Warning
Signal tones
An intermittent tone indicates when the ve-
hicle is approaching an object. E.g., when an
object is detected to the left rear of the ve-
hicle, a signal tone sounds from the left rear
speaker.
The shorter the distance to the object, the
shorter the intervals.
When the distance to a detected object is
less than approx. 10 inches/25 cm, a contin-
uous tone is sounded.
With front PDC: when objects are simulta-
neously located both in front of and behind
the vehicle, an alternating continuous sig-
nal is sounded.
The signal tone is switched off, when selec-
tor lever position P is engaged on vehicles
with Steptronic transmission.
Volume
The ratio of the PDC signal tone volume to
the entertainment volume can be adjusted.
1. "My MINI"
2. "System settings"
3. "Tone"
4. "Volume settings"
5. "PDC"
6. Set the desired value.
The setting is stored for the driver profile
currently used.
Visual warning
The approach of the vehicle to an object can
be shown on the Control Display. Objects
that are farther away are already displayed
on the Control Display before a signal
sounds.
A display appears as soon as Park Distance
Control (PDC) is activated.
The range of the sensors is represented in
colors: red, green and yellow.
When the image of the rearview camera is
displayed, the switch can be made to PDC:
"Rear view camera"
System limits
Safety information
Warning
The system is designed to operate in cer-
tain conditions and circumstances. Due to
conditions or other factors, the system
may not respond. There may be a risk of
accident or risk of damage to property. Ac-
tively intervene as warranted. Refer to the
information in this Owner’s Manual re-
garding the scope of the system’s opera-
tion and limitations.
With rear luggage rack or when the
trailer power socket is in use
The rear PDC functions are switched off.
A Check Control message is displayed.
Limits of ultrasonic measurement
The detection of objects with ultrasonic
measurements can run into physical limits,
for instance under the following conditions:
For small children and animals.
For persons with certain clothing, for in-
stance coats.
With external interference of the ultra-
sound, for instance from passing vehi-
cles or loud machines.
Seite 186
CONTROLS Driving comfort
186
Online Edition for Part no. 01405A02C45 - II/20
Loading ...
Loading ...
Loading ...