Loading ...
Loading ...
Loading ...
Before unlocking the transmission lock, set
the parking brake to prevent the vehicle
from rolling away.
Engaging selector lever position N
Unlocking is possible, if the starter can spin
the engine.
1. Press and hold down brake pedal.
2. Press the Start/Stop button. The starter
must audibly start.
3. Press the button on the selector lever,
arrow 1, and press and hold the selector
lever into selector lever position N, ar-
row N, until selector lever position N is
displayed in the instrument cluster.
A Check Control message is displayed.
4. Release the selector lever.
5. Release brake, as soon as the starter
stops.
6. Maneuver the vehicle from the danger
area and secure it against moving on its
own.
For additional information, see the chapter
on tow-starting and towing.
Steptronic Sport transmission:
Launch Control
Concept
Launch Control enables optimum accelera-
tion on surfaces with good traction under
dry surrounding conditions.
General information
The use of Launch Control causes prema-
ture component wear since this function
represents a very heavy load for the vehicle.
Do not use Launch Control during the
break-in, refer to page 224, period.
Do not turn the steering wheel when driv-
ing away with Launch Control.
Functional requirements
Launch Control is available as soon as the
engine and transmission are at operating
temperature.
Depending on the external temperature and
driving style, the engine and transmission
require an interrupted trip of up to
30 miles/50 km in order to reach the oper-
ating temperature needed for Launch Con-
trol.
Start with launch control
While the engine is running:
1. Press button and select SPORT
with the MINI Driving Modes switch.
The instrument cluster displays TRAC-
TION in combination with SPORT. The
DSC OFF indicator light lights up.
2. Engage selector lever position S.
3. With the left foot, forcefully press down
on the brake.
4. Press and hold down the accelerator
pedal beyond the resistance point at the
full throttle position, kickdown.
A flag symbol is displayed in the instru-
ment cluster.
5. The starting engine speed adjusts. Wait
briefly until the engine speed is con-
stant. Keep accelerator pedal in this po-
sition.
6. Release the brake within 3 seconds after
the flag symbol illuminates.
Seite 118
CONTROLS Driving
118
Online Edition for Part no. 01405A02C45 - II/20
Loading ...
Loading ...
Loading ...