Loading ...
Loading ...
Loading ...
Selector lever version
General information
Depending on the vehicle equipment, a
transmission with either a latching selector
lever or a tap-operated selector lever is in-
stalled.
Transmission with a latching selector
lever
The selector lever positions P, R, N, and D
are selected by moving the selector lever
into the respective selector lever position.
The selector lever engages in the selector
lever positions.
Transmission with a tap-operated
selector lever
The selector lever positions R, N, and D are
selected by tapping the selector lever for-
ward or back. The selector lever automati-
cally returns to the center position when re-
leased.
The selector lever position P is engaged by
pressing the P button on the selector lever
or, in certain situations, automatically, refer
to page 112.
Selector lever positions
Drive mode D
Selector lever position for normal vehicle
operation. All gears for forward travel are
activated automatically.
R is reverse
Engage selector lever position R only when
the vehicle is stationary.
Neutral N
The vehicle may be pushed or roll without
engine power in selector lever position N,
for instance in vehicle washes, refer to
page 114.
Parking position P
General information
Selector lever position, for instance for
parking the vehicle.
The transmission blocks the drive wheels in
selector lever position P.
Engage selector lever position P only when
the vehicle is stationary.
Before exiting the vehicle, make sure that
selector lever position P is set. Otherwise,
the vehicle may begin to move.
Automatic parking position for a
transmission with a tap-operated selector
lever
Selector lever position P is engaged auto-
matically in situations such as the follow-
ing:
– After the engine is switched off when
the vehicle is in the radio-ready state,
refer to page 97, or when the ignition is
switched off, refer to page 96, while se-
Seite 112
CONTROLS Driving
112
Online Edition for Part no. 01405A02C45 - II/20
Loading ...
Loading ...
Loading ...