Loading ...
Loading ...
Loading ...
and wheels allow the TPMS to continue to
function properly.
Flat Tire Monitor FTM
Concept
The system detects tire inflation pressure
loss on the basis of rotation speed differen-
ces between the individual wheels while
driving.
In the event of a tire inflation pressure loss,
the diameter and therefore the rotational
speed of the corresponding wheel changes.
The difference will be detected and reported
as a flat tire.
The system does not measure the actual in-
flation pressure in the tires.
Functional requirements
The following conditions must be met for
the system; otherwise, reliable flagging of a
loss of tire inflation pressure is not assured:
– After a tire or wheel replacement, an ini-
tialization was performed with the cor-
rect tire inflation pressure.
– After the tire pressure was adjusted to a
new value, an initialization was per-
formed.
Status display
The current status of the flat tire monitor
can be displayed, for instance whether the
RPA is active.
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle status"
3. "Flat Tire Monitor"
The status is displayed.
Initialization required
An initialization must be performed in the
following situations:
– After the tire inflation pressure has
been adjusted.
– After a tire or wheel replacement.
Performing initialization
When initializing, the set tire inflation
pressures serve as reference values in order
to detect a flat tire. Initialization is started
by confirming the tire inflation pressures.
Do not initialize the system when driving
with snow chains.
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle status"
3. "Flat Tire Monitor"
4. Start the engine but do not drive off.
5. Start the initialization with: "Perform
reset".
6. Drive away.
The initialization is completed while driv-
ing, which can be interrupted at any time.
The initialization automatically continues
when driving resumes.
Messages
General information
When a flat tire is indicated, DSC Dynamic
Stability Control is switched on, if needed.
Safety information
Warning
A damaged regular tire with low or miss-
ing tire inflation pressure impacts han-
dling, such as steering and braking re-
sponse. Run-flat tires can maintain limited
Seite 158
CONTROLS Safety
158
Online Edition for Part no. 01405A02C45 - II/20
Loading ...
Loading ...
Loading ...