Loading ...
Loading ...
Loading ...
en Supplementary sheet for the installation and operating instructions
56
[ Consumption values table
Supplementary sheet for the installation and operating instructi ons
Energy and water consumption, programme duration and residual moisture for
the main washing programme
(approximate values)
Programme Load Energy consump-
tion*
Water consump-
tion*
Programme
duration*
Cottons 20 °C 10 kg 0,39 kWh 90 l 3 h
Cottons 40 °C 10 kg 1,29 kWh 90 l 3^ h
Cottons Eco 40 °C ** 5 kg 0,47 kWh 47 l 6 h
Cottons Eco 60 °C ** 5 kg 0,55 kWh 47 l 6 h
Cottons Eco 60 °C ** 10 kg 0,82 kWh 60 l 6^ h
Cottons 60 °C 10 kg 1,55 kWh 90 l 3] h
Cottons 90 °C 10 kg 2,75 kWh 106 l 3 h
Easy-Care 40 °C 4 kg 0,85 kWh 62 l 2 h
Mixed Fabrics 40 °C 4 kg 0,66 kWh 45 l 1] h
Delicates/Silk 30 °C 2 kg 0,25 kWh 37 l _ h
Wool 30 °C 2 kg 0,22 kWh 41 l _ h
sensoFresh intensive 1 kg 0,05 kWh 0 l _ h
Hygiene Mix 40 °C 4 kg 0,66 kWh 45 l 1_ h
Drum Clean 90 °C 0 kg 1,45 kWh 28 l 1^ h
Programme Approximate information on the residual moisture***
WM14U940...
Max. 1400 rpm
Cottons 48 %
Easy-Care 40 %
Delicates/Silk 30 %
Wool 45 %
Values determined according to EN60456.
* Observed values may deviate from the indicated values due to influence of water pressure, hardness and inlet tem-
perature, ambient temperature, type, amount and soiling of laundry, detergent used, fluctuations in power supply
and selected additional functions.
** Program settings with maximum spin speed for testing and energy labeling in accordance with EU Directive 2010/
30/EU with cold water (15°C).
The programs are suitable for the cleaning of normally soiled cotton textiles and regarding the combination of en-
ergy and water consumption the most effective.
The specification of the programme temperature is based on the temperature stated on the care label in the textiles.
The actual washing temperature may deviate from the indicated programme temperature for reasons of saving en-
ergy. The washing efficiency corresponds to the legal requirements.
*** Information on residual moisture based on program-dependent spin-speed limit and maximum loads.
Loading ...
Loading ...
Loading ...