Loading ...
Loading ...
Loading ...
en Operating the appliance
28
B Delayed start
Before the programme starts, you can
set the time at which you want the
programme to finish.
1. Touch B.
2. Slide your finger along the bar until
the required number of hours and
minutes are shown/the time at which
you want the programme to end is
shown.
Note: Once you have set the time
on your appliance, you can set the
time at which you want the
programme to end.
If you have not set the time, you will
only be able to set when the
programme ends in hours and
30 minute increments.
3. Touch I.
The programme end has now been
set and your programme will start
after a delay.
Note: As long as the programme has
not yet started, you will still be able to
load more laundry or remove some
from the drum.
± Flex start
Activate the Flex start function to allow
your smart energy system (Energy
manager) to start your appliance once
your home photovoltaic system is able
to provide sufficient energy or the
energy tariff is good.
Note: Your smart energy system
(Energy manager) cannot start your
appliance until it is connected to the
appliance.
Activating Flex start
1. Touch B.
2. Slide your finger along the bar until
the required time period is shown in
hours or as a clock time.
Note: Once you have set the time
on your appliance, you can use this
to set the time period.
If you have not set the time or if you
have deactivated it, you will only be
able to set the time period in hours.
3. Touch I.
4. Touch }.
The Flex start function has now been
activated and the appliance will wait to
be started by the smart energy system
(Energy manager).
Notes
■ If the smart energy system (Energy
manager) does not start the
appliance, the programme will still
be started before the set time period
ends.
The programme will then end when
the time period ends.
■ To prevent the build-up of odours,
the appliance is always started with
Flex start such that the laundry
never remains in the drum for more
than 6 hours after the programme
has ended.
■ Any action on the appliance (such as
adjusting the programme selector)
will deactivate Remote start and in
turn the Flex start function.
If the Flex start function is
deactivated by an action being
performed on the appliance, the B
Delayed start will remain active.
Adding more laundry or removing
laundry
If the Flex start function has already
been activated but the programme has
not yet started, you will still be able to
load more laundry or remove some
from the drum.
Loading ...
Loading ...
Loading ...