Loading ...
Loading ...
Loading ...
The seats are warmed by built-in heaters. The
switches are located on the center console.
1. Start the engine.
2. Select heat range.
쎻
1
For high heat, push the (High) side
of the switch.
쎻
2
For low heat, push the (Low) side of
the switch.
쎻
3
For no heat, the switch has a center OFF
position between low and high.
The indicator light
쎻
A
in the switch will
illuminate when low or high is selected.
The heater is controlled by a thermostat,
automatically turning the heater on and off.
The indicator light will remain on as long as
the switch is on.
3. When the vehicle’s interior is warmed, or
before you leave the vehicle, be sure to turn
the switch to the OFF position
쎻
3
.
An optional ventilated net seat has this built-in
heater only in the seat cushion part, not in the
seatback.
CAUTION
쐌 The battery could be discharged if
the seat heater is operated while the
engine is not running.
쐌 Do not use the seat heater for ex-
tended periods or when no one is
using the seat.
쐌 Do not put anything on the seat
which insulates heat, such as a blan-
ket, cushion, seat cover, etc. Other-
wise, the seat may become over-
heated.
쐌 Do not place anything hard or heavy
on the seat or pierce it with a pin or
similar object. This may result in
damage to the heater.
쐌 Any liquid spilled on the heated seat
should be removed immediately with
a dry cloth.
쐌 When cleaning the seat, never use
gasoline, benzine, thinner, or any
similar materials.
쐌 If any abnormalities are found or the
heated seat does not operate, turn
the switch off and have the system
checked by a NISSAN dealer.
SIC3002
HEATED SEATS (if so equipped)
2-28 Instruments and controls
墌 08.7.24/Z33-D/V5.0 墍
Loading ...
Loading ...
Loading ...