Loading ...
Loading ...
Loading ...
VOLT METER
When the ignition switch is turned to the ON
position, the volt meter indicates the battery
voltage; while the engine is running, it indicates
the alternator voltage of 11 - 15 volts (normal
range
쎻
A
). However, while cranking the engine,
the volts drop below the normal range.
If the needle is not in the normal range
쎻
A
while
the engine is running, it may indicate that the
charging system is not functioning properly.
Have the system checked by a NISSAN dealer.
TRIP COMPUTER
The display of the trip computer is situated in the
triple meter. When the ignition switch is turned
to ON, the display scrolls all the modes of the
trip computer and then shows the mode chosen
before the ignition switch is turned OFF.
Switches for the trip computer are located on
the side of the combination meter panel. To
operate the trip computer, push the side of the
switches as shown above.
쎻
A
: Trip computer mode switch
쎻
B
: Trip computer setting switch
When the ignition switch is turned to ON, modes
of the trip computer can be selected by pushing
the trip computer mode switch
쎻
A
.
Each time the mode switch
쎻
A
is pushed, the
display will change as follows:
Speed indicator → Outside air temperature
(ICY) → Distance to empty (dte) → Average fuel
SIC1955 SIC3357 SIC2997
2-8 Instruments and controls
墌 08.7.24/Z33-D/V5.0 墍
Loading ...
Loading ...
Loading ...