Loading ...
Loading ...
Loading ...
CAUTION
Use the headlights with the engine run-
ning to avoid discharging the vehicle
battery.
Headlight beam select
쎻
1
To select the high beam, push the lever
forward. The high beam lights come on and
the high beam indicator light
illumi-
nates.
쎻
2
Pull the lever back to select the low beam.
쎻
3
Pulling the lever toward you will flash the
headlight high beam.
Battery saver system
쐌 When the headlight switch is in the or
position while the ignition switch is in
the ON position, the lights will automatically
turn off 5 minutes after the ignition switch has
been turned to the OFF position.
쐌 After the headlights automatically turn off with
the headlight switch in the
or po-
sition, the headlights will illuminate again for 5
minutes if the headlight switch is turned to
the OFF position and then turned to the
or position.
CAUTION
Even though the battery saver feature
automatically turns off the headlights
after a period of time, you should turn
the headlight switch to the OFF position
when the engine is not running to avoid
discharging the vehicle battery.
DAYTIME RUNNING LIGHT SYSTEM
(Canada only)
The headlights (low beam) automatically illumi-
nate when the engine is started with the parking
brake released. The daytime running lights op-
erate with the headlight switch in the OFF
position or in the
position.
If the parking brake is applied before the engine
is started, the daytime running lights do not
SIC3315
Instruments and controls 2-25
墌 08.7.24/Z33-D/V5.0 墍
Loading ...
Loading ...
Loading ...