Loading ...
Loading ...
Loading ...
7. After starting your engine, carefully discon-
nect the negative cable and then the positive
cable.
8. Replace the vent caps (if so equipped). Be
sure to dispose of the cloth used to cover the
vent holes as it may be contaminated with
corrosive acid.
Do not attempt to start the engine by pushing.
CAUTION
쐌 Automatic transmission models can-
not be push started. Attempting to do
so may cause transmission damage.
쐌 Three-way catalyst equipped models
should not be started by pushing
since the three-way catalyst may be
damaged.
쐌 Never try to start the vehicle by tow-
ing it; when the engine starts, the
forward surge could cause the ve-
hicle to collide with the tow vehicle.
WARNING
쐌 Do not continue to drive if your ve-
hicle overheats. Doing so could
cause engine damage or a vehicle
fire.
쐌 To avoid the danger of being scalded,
never remove the radiator cap while
the engine is still hot. When the ra-
diator cap is removed, pressurized
hot water will spurt out, possibly
causing serious injury.
쐌 Do not open the hood if steam is
coming out.
If your vehicle is overheating (indicated by an
extremely high temperature gauge reading), or if
you feel a lack of engine power, detect abnormal
noise, etc., take the following steps:
1. Move the vehicle safely off the road, apply the
parking brake and move the shift lever to the
N (Neutral) position (automatic transmission
to the P (Park) position).
Do not stop the engine.
2. Turn off the air conditioner. Open all the
PUSH STARTING IF YOUR VEHICLE OVERHEATS
In case of emergency 6-9
墌 08.7.24/Z33-D/V5.0 墍
Loading ...
Loading ...
Loading ...