Loading ...
Loading ...
Loading ...
installation instructions
DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate position - beneath flat bottom
cabinet
*%,%
", MountingPlateTabs
" _theCabinetBottom
olOl
,11
III
III
Atleast30" upto36"
Plate position _ beneath framed recessed
cabinet bottom
MountingPlateTabs
Touchingthe Back
Frame
\
III
30" toCooktop
Plate position - beneath recessed bottom
cabinet with front overhang
MountingPlatewith
TabsBelowCabinet
Bottomthe Same
Distanceasthe Front
OverhangDepth
I II
I II
30" to Cooktop
Your cabinets may have decorative trim that interferes
with the microwave installation, Remove the decorative
trim to install the microwave properly and to make it
level,
THE MICROWAVE HOOD MUST BE LEVEL,
Use a level to make sure the cabinet bottom is level.
If the cabinets have a front overhang only, with no
back or side frame, install the mounting plate down
the same distance as the h'ont overhang depth_ This
will keep the microwave hood level.
_ Measure the inside depth of the front overhang
[_] Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the front overhang.
_] For this type of installation with front overhang only,
align the mounting tabs with this horizontal line, not
touching the cabinet bottom as described in Step D
9
Loading ...
Loading ...
Loading ...