Loading ...
Loading ...
, , Installation instructions ........................................................................................................................................
mMPORTANT SAFETY INSTRUCTmONS
This product requires a three-prong grounded outlet.
The installer must perform a ground continuity check
on the power outlet box before beginning tl3e
installation to insure that the outlet box is properly
grounded. If not properly grounded, or if the outlet
box does not meet electrical requirements noted
(under ELECTRICAL REQUIREMENTS), a qualified
electrician should be employed to correct any
deficiencies.
CAUTION: For personal
safety, remove house fuse
or open circuit breaker
before beglrmhag
installation to avoid severe
or fatal shock injury.
CAUTION: For personal safety, the mounting surface
mnst be capable of supporting the cabinet load, in
addition to the added weight of thls 63--85 pound
product, plus additional oven loads of up to 50 pounds
or a total weight of 113--135 pounds.
CAUTION: For personal safety, this product cannot
be installed in cabinet arrangements such as an island or
a peninsula. It must be mounted to BOTH a top cabinet
AND a wall.
NOTE: For easier installation and personal safety, it is
recommended that two people install this product.
IMPORTANT - PLEASE READ CAREFULLY. FOR
PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED TO AVOID SEVERE OR
FATAL, SHO CIL
The power cord of this appliance is equipped with a
three-prong (grounding)
pIug which mates with a
standard threc_prong
(grounding) wall receptacle
to rednimize the possibility
of electric shock hazard
from tiffs appliance.
Ensureproper
groundexists
beforeuse
You should have the wall receptacle and circuit checked
by a qualified electrician to make sure the receptacle is
properly grounded.
Where a standard two-prong wall receptacle is
encountered, it is very important to have it replaced
with a properly grounded three-prong wall receptacle,
installed by a qualified electrician.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT,
DEFORM OR REMOVE ANY OF THE PRONGS
FROM THE POWER CORD. DO NOT USE WITH
AN EXTENSION CORD.
ELECTRICAL
REQUIREMENTS
Product rating is 120 volts AC, 60 Hertz, 15 amps and
!. 58 ldlowatts This product must be connected to a
supply circuit of the proper voltage and frequency
Wire size must conform to the requirements of the
National Electrica! Code or the prevailing local
code for this kilowatt rating,, The power' supply
cord and plug should be brought to a separate
15- to 20-ampere branch circuit single grounded
outlet,, The outlet box should be located in the
cabinet above the microwave hood,, The outlet box
and supply circuit should be installed by a qualified
electrician and conform to the National Electrical
Code or the prevailing local code.
3
Loading ...
Loading ...
Loading ...