Loading ...
Loading ...
Loading ...
Installation instructions
[_ ALIGNING THE WALL PLATE
.........l
............. : : ..... IIII iii i [ILILIIiii
DrawaVertical
| | i J LineonWall
!! ! ! .oleC C_.terlino_f.-o_ Ceote,of
| | ! | I Notches TopCabinet
_'0 o_,_oo.-.-.o.-.-._ooooooO.O.OoOo.oO.._o
CAUTION: Wear gloves
to avoid cutting finger's on
sharp edges.
Area E ! H01eD
I
t
[1-_ Draw a vertica! line on the walt at the center o[ the
30" wide space,.
[_] Use the mounting plate as the template for tile rear
wall, Place the mounting plate on the wall, making
sure that dae tabs are touching the bottom of the
cabinet or the level line drawn in Step C for cabinets
with front overhang. Line up the notch and centerline
on the bottom of the mortaring plate to the eenterline
on the wall
[_ While holding the mounting plate with one hand,
draw circles on the wall at holes A, B, C and D
(see illustration above/actual plate marked with
arrows), Four holes must be used for mounting.
[]
NOTE: Holes C and D are inside area E tf neitiaer
C nor D is in a stud, find a stud somewhere in area E
and draw a fifth circle to tine up with the stud, tt is
important to use at least one wood screw mounted
Frrmly in a stud to support the weight of the
microwave hood,
Set the mounting plate aside.
Drill holes on the circles If there is a stud, drill a 3/16"
hole for wood screws_ For holes that don't line up with
a stud, dr_ll a 5/8"hole ['or toggle bolts_
NOTE: DO NOT MOUNT THE PLATE AT THIS
TIME.
10
Loading ...
Loading ...
Loading ...