Loading ...
Loading ...
Loading ...
mnstallation instructions
MOUNT THE MICROWAVE
HOOD
FOR EASIER INSTALLATION AND PERSONAL.
SAFETY, WE RECOMMEND THAT TWO PEOPLE
INSTALL THIS MICROWAVE HOOD.
IMPORTANT: Do not grip or use handle
during installation.
NOTE: If your cabinet is metal, use the nylon
grommet around the power cord hole to prevent
cutting of the cord
NOTE: We recommend using filler blocks if the
cabinet front hangs below the cabinet bottom shell
IMPORTANT: If filler blocks are
not used, case damage may occur from
overtightening screws.
NOTE: When mounting
the microwave hood,
thread power cord
through hole in bottom of'
top cabinet. Keep it tight
throughout Steps 1-3
Do not pinch cord or
lift microwave hood
by pulling cord
[]Lift microwave hood,
tilt it forward, and
hook slots at back
bottom edge onto
four lower tabs of
mounting plate,
/
[_Rotate front of microwave
hood up against cabinet
bottom.
[_Insert a self-aligning screw through top center
cabinet hole. Temporarily secure the microwave hood
by turning the screw at least two full turns after the
threads have engaged, (It wilt be completely
tightened later..) Be sure to keep power cord tight,
Be careful not to pinch dm cord, especially when
mounting flush to bottom of cabinet.
CabinetFront
Cabinet8ottornShelf
Filler81ock
T quivalent
to Depth
of Cabinet
Recess
Self-AligningScrew
MicrewaveHoodTop
{_ Attach the microwave hood to the top cabinet.
[_ insert 2 self-aligning screws
through outer top cabinet
holes Turn two full turns on
each screw.
{_Tighten center
screw completely
[_ Tighten the outer two screws to the top of the
microwave hood. (While tightening screws, hold
the microwave hood in place against the wall
and the top cabinet.)
[_] Install grease filters,
See the Use and Care
Guide packed with
the microwave hood
13
Loading ...
Loading ...
Loading ...