Loading ...
Loading ...
Loading ...
186
Q
When connecting to a computer-to-computer (Ad Hoc) network, I cannot
connect to another computer on the same computer-to-computer network.
A1 Make sure that the security settings and network name of the computer-to-comput-
er (Ad Hoc) network are correct.
A2 Check the TCP/IP properties of the computers to be connected through the com-
puter-to-computer (Ad Hoc) network. All computers to be connected through the
computer-to-computer (Ad Hoc) network should be configured so that their IP ad-
dresses are within the same subnet range.
● If the TCP/IP Settings are configured to DHCP, the address is automatically con-
figured to an address within the subnet IP range. This will take about 2~3 min-
utes.
● If the IP address is configured to a static IP in the TCP/IP properties, select
Use the following IP address in the TCP/IP properties of the wireless adapter,
configure an IP address between 10.0.0.1~10.0.0.254, and a Subnet mask of
255.255.255.0, and try again.
● A fixed IP is recommended for a small-sized network.
● If you are using a DHCP IP address, the system boot time may be extended.
Q
When using a computer-to-computer (Ad Hoc) network, sometimes I cannot
search the access point.
A It may happen occasionally when you are using a computer-to-computer (Ad Hoc)
network connection. Even if you cannot find some access points, the computer-to-
computer (Ad Hoc) network is operating properly. Click Refresh to view the latest
search result.
Loading ...
Loading ...
Loading ...