Loading ...
Loading ...
Loading ...
4
AUTO POWER OFF function
When none of the keys have been pressed for approximately 7
minutes, the Organizer automatically turns the power off to save the
batteries. (The actual time may vary depending on the conditions of
use.) Press
ON
to resume operation.
Backlight
Pressing
BACKLIGHT
once illuminates the display and the Backlight
will remain on for as long as you continue to use the Organizer, or when
none of the keys have been pressed for fifteen seconds.
The Backlight may remain on for less than fifteen seconds if the battery
level is very low.
The length of time to turn on the Backlight can be changed. (Refer to
page 31.)
NOTES:
Do not use the Backlight unnecessarily.
• Since the Backlight drains power from the operating batteries,
excessive use of the Backlight will significantly reduce your battery life.
• Continuous use of the Backlight will, over time, lead to gradual loss
of brightness.
If the Backlight is on for 10 minutes per day (for example 15 seconds
40 times a day), the brightness will be reduced by half after 10* years
(at an ambient temperature of 25°C/77°F and 65% humidity).
* This figure may vary depending on the surrounding environment.
Freeing up memory
When you turn the power on, the following message may be displayed,
asking you to free up memory by deleting unnecessary space:
“DO YOU WANT TO FREE UP MEMORY? (Yes/No)”
Press
Y
to delete them. Freeing up memory requires maximum one
minute.
Press
N
when you wish to start the operation soon.
For more information, refer to page 31, “Freeing up memory”.
GETTING STARTED
Display symbols
BATT This symbol appears when the operating battery level is low.
Åñ The data appearing on the display is secret data accessible
only by password.
S The secret function is in effect.
A “beep” will sound when a key is pressed.
The specified schedule alarm(s) will sound.
CAPS Capital (uppercase) letters will be entered. To enter small
(lowercase) letters, turn “CAPS” off by pressing
CAPS
.
EDIT The entry on the display may be edited.
2nd
2nd
has been pressed.
řŴ There is more data which is not on the display. The data can
be displayed by pressing
or .
NOTE: The symbol “★” shown by setting the LCD contrast to DARK is
not used in this product.
The keys
These keys are used to select capital or small letters or to access the
symbols marked in white above keys. While holding down
, press
the desired key to be entered.
Turning the “beep” on and off
While “ ” is displayed, a “beep” will sound when a key is pressed. To
turn the “beep” on and off, press
2nd
. The “beep” will not
sound after “
” goes off. To turn the “beep” back on, repeat the
process.
Loading ...
Loading ...
Loading ...