Loading ...
Loading ...
Loading ...
75
Item Description
OSD MESSAGE
SETUP menu
Using the ▲/▼ buttons turns on/off the message function.
NORMAL
SILENT
INHIBIT
■SILENT
: The following message functions do not work.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“INVALID SCAN FREQ.”
“NOT AVAILABLE”
“Searching….” while searching for the input
“Detecting….” while an input signal is detected
The indication of the ZOOM displayed by changing
*While operating from the remote control only.
The indication of the FOCUS displayed by changing
The indication of the input signal displayed by changing
The indication of the aspect ratio displayed by changing
The indication of the PICTURE MODE displayed by changing
The indication of the ACTIVE IRIS displayed by changing
The indication of the MY MEMORY displayed by changing
The indication of “FREEZE” and “II” while freezing the screen by
pressing the
FREEZE
button.
The indication of the TEMPLATE displayed by changing.
The indication of the ECO MODE displayed by changing.
■INHIBIT
: All message functions does not work.
The following buttons function:
STANDBY, ON
Status Monitor can be operated.
• To change this function, follow the steps below.
1. Press the
OSD MSG
button on the remote control for three
seconds.
2. The INHIBIT OSD is displayed.
While this OSD is displayed, press the
OSD MSG
button again on
the remote control.
3. Toggle and change the function.
NORMAL
SILENT
INHIBIT
Loading ...
Loading ...
Loading ...