Loading ...
Loading ...
Loading ...
123
Troubleshooting
Issues Cases not involving a machine defect Page
The
IR
and RS-
232C does not
work on
HDBaseT
connection
The SAVING function is working.
Select NORMAL for STANDBY MODE item in the SETUP
menu.
74
HDBaseT
connection
does not work
The SAVING function is working.
Select NORMAL for STANDBY MODE item in the SETUP
menu.
74
The connected equipment may not be supported by
HDBaseT.
Refer to User's manual (detailed) for connection.
12~
14
IR and LAN
does not
work through
HDBaseT
Check if the IR setting is OFF under HDBaseT.
EASY MENU > ADVANCED MENU > OPTION >
SERVICE
> REMOTE RECEIV.
90
Check if the LAN setting is HDBaseT.
EASY MENU > ADVANCED MENU > NETWORK >
WIRED NETWORK
*
LAN does not
work, if LAN is
connected to
the projector
while having
an input signal
from HDBaseT
Check if the LAN setting is HDBaseT.
EASY MENU > ADVANCED MENU > NETWORK >
WIRED NETWORK
*
This projector is compatible with 100BASE-T only.
Check the specication of the connected equipment.
-
If the LAN cable is connected with the hub, try to change
the connected port at the hub.
-
If the LAN cable is connected directly to the computer, try
to connect to other computer.
-
No image
is displayed
through
HDBaseT
Check the LAN cable if it is CAT5e certied or higher.
-
Try to change the LAN cable.
-
If the LAN cable is connected with more than three
extension connector, the transmission of 100 meters may
fail.
-
Check if the extension connector is compatible with
CAT5e.
All LAN cable and extension connector connected with
HDBaseT port must be CAT5e certied.
-
*see the Network Guide
(continued on next page)
Loading ...
Loading ...