Loading ...
Loading ...
Loading ...
72
Item Description
LAMP & FILTER
(continued)
CYCLE TIME
Using the ▲/▼ cursor buttons changes the CYCLE TIME.
6h
12h
18h
24h
1 week
Lamp switches according to the setting here.
• This function is only available if CYCLE TIME is selected at ALTERNATE
of LAMP MODE.
LAMP-1 TIME
The lamp time is the usage time of the lamp-1, counted after the last
resetting. It is shown in the LAMP & FILTER menu.
Pressing the
RESET
button on the remote control or the ► button
of the projector displays a dialog.
To reset the lamp time, select the OK using the ► button.
CANCEL
OK
• Reset the lamp time only when you have replaced the lamp, for a
suitable indication about the lamp.
• For the lamp replacement, see the section
Replacing the lamp
(
102
).
• The lamp time can be checked also with the Status Monitor (
24
).
LAMP-2 TIME
The lamp time is the usage time of the lamp-2, counted after the last
resetting. It is shown in the LAMP & FILTER menu.
Pressing the
RESET
button on the remote control or the ► button
of the projector displays a dialog.
To reset the lamp time, select the OK using the ► button.
CANCEL
OK
• Reset the lamp time only when you have replaced the lamp, for a
suitable indication about the lamp.
• For the lamp replacement, see the section
Replacing the lamp
(
102
).
• The lamp time can be checked also with the Status Monitor (
24
).
SETUP menu
(continued on next page)
Loading ...
Loading ...
Loading ...