Loading ...
Loading ...
Loading ...
- 68 -
Anynet+ (HDMI-CEC) Isn't Working
When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem Try this!
Anynet+ does not work.
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices
only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDMI-CEC) ( Settings General External Device Manager
Anynet+ (HDMI-CEC)) and see if Anynet+ (HDMI-CEC) has been set to On.
Anynet+ may not function when some other functions are active, including Channel Search,
Smart Hub, Initial Setup, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices again or turn
your TV off and on.
I want to start Anynet+.
Move the focus to the Anynet+ device at Source, and then press Select button.
Check if the Anynet+ device is properly connected to the TV, and then select Anynet+ (HDMI-
CEC) ( Settings General External Device Manager Anynet+ (HDMI-CEC))
menu to see if Anynet+ (HDMI-CEC) is set to On.
I want to exit Anynet+.
Set Anynet+ (HDMI-CEC) ( Settings General External Device Manager
Anynet+ (HDMI-CEC)) to Off.
The message "Connecting
to Anynet+ device..." or
"Disconnecting from
Anynet+ device" appears
on the screen.
You cannot use the remote control when the TV is configuring Anynet+ or switching to a
viewing mode. Use the remote control after the TV has completed the Anynet+ configuration or
has switched to a viewing mode.
The Anynet+ device won't
play.
You cannot use the play function when Start Setup is in progress.
The connected device is
not displayed.
Check whether the device supports Anynet+.
Check whether the HDMI cable is properly connected.
Go to Anynet+ (HDMI-CEC) ( Settings General External Device Manager
Anynet+ (HDMI-CEC)) and see if Anynet+ (HDMI-CEC) has been set to On.
Scan for Anynet+ devices again.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the device is
connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+.
If the connection is terminated because there has been a power failure or the HDMI cable has
been disconnected, please scan for the device again.
The TV audio is not being
played through the
receiver.
Connect an optical cable to the TV and the receiver.
ARC enables the TV to output digital sound via the HDMI (ARC) port.
However, ARC is only available when the TV is connected to an audio receiver that supports
ARC.
Loading ...
Loading ...
Loading ...