User Manual - Page 147

For QN85Q80TAFXZC.

Loading ...
Loading ...
Loading ...
Sound and Noise Issues
When the TV has difculties with sound, these steps may help resolve the problem.
Testing the sound
Settings Support Device Care Self Diagnosis Sound Test Try Now
If the TV plays the Sound Test melody without distortion, there may be a problem with an external device or the
broadcast signal's strength.
The problem Try this!
How can I connect an audio device
to the TV?
The connection method may differ depending on the audio device, such as HDMI
(eARC), Optical, Bluetooth, and Wi-Fi.
For more information about how to connect an audio device, run Connection Guide.
Source Connection Guide Audio Device
There is no sound or the sound is
too low at maximum volume.
Check the volume control of your TV, and then check the volume control of the
external device (cable box or satellite box, DVD, Blu-ray, etc.) connected to your TV.
Check the cable connection between an external device and the TV and then try cable
connection again.
The picture is good but there is no
sound.
Set Sound Output to TV Speaker.
Settings Sound Sound Output
If you are using an external device, check the device’s audio output option.
For example, you may need to change your cable box’s audio option to HDMI if the box
connected to your TV is using an HDMI cable.
To listen to computer sound, connect an external speaker to the computer’s audio
output connector.
If your TV has a headphone jack, make sure there is nothing plugged into it.
Reboot the connected device by disconnecting and then reconnecting the device’s
power cable.
With a set-top box or cable box, check the cable connection and reboot the external
device. When the symptom persists, contact your service provider.
No sound is heard.
Check whether Digital Output Audio Format is set to Pass-Through.
If you select the Pass-Through option to use an AV receiver that does not support
Dolby Digital+, no sound is output with Dolby Digital+ content.
It is recommended to set Digital Output Audio Format to Auto when the connected
receiver supports only the limited audio formats.
Settings Sound Expert Settings Digital Output Audio Format
Auto
- 147 -
Loading ...
Loading ...
Loading ...