Loading ...
Loading ...
Loading ...
67Cockpit
Menu Function
Average fuel con-
sumption
When the ignition is switched on, the average con-
sumption (in l/100 km or in mpg) is displayed after
the vehicle has moved approximately 100 metres
(328 feet). Otherwise horizontal lines are displayed.
The value shown is updated approximately every 5
seconds.
Fuel range Approximate distance in km (or miles) that can still
be travelled with the fuel remaining in the tank, as-
suming the same style of driving is maintained. This
is calculated using the current fuel consumption.
Distance covered Distance travelled, after ignition is switched on, in
km (or miles).
Average speed After the ignition is switched on, the average speed
will be shown after a distance of approximately 100
metres (328 feet) has been travelled. Otherwise hori-
zontal lines are displayed. The value shown is upda-
ted approximately every 5 seconds.
Digital display of
speed
Current speed displayed digitally.
Oil temperature digi-
tal display
Updated engine oil temperature digital display
Speed warning to ---
km/h
If the stored speed is exceeded (between 30 -
250 km/h, or 18 - 155 mph), an audible warning is
given together with a visual warning.
Changing between display modes
● In vehicles without multifunction steering wheel: press the lever.
● Vehicles with a multifunction steering wheel: press
or
.
Storing a speed for the speed warning
● Select the display Speed warning at --- km/h.
● Press
OK
to store the current speed and switch off the warning.
● In addition, set the required speed by pressing the rocker switch on the
windscreen wiper lever or buttons
or
on the multifunction steering
wheel for 5 seconds. Next, press
OK
again or wait a few seconds. The
speed is stored and the warning activated.
● To switch off, press
OK
. The stored speed is deleted.
Manually erasing memory 1 or 2
● Select the memory to be erased.
● Press and hold
OK
for approximately two seconds.
Personalising the displays
It is possible to select which of the displays in the multifunction display you
wish to see on the instrument panel in the settings menu. The units of
measurement can also be modified ⇒ page 67.
Configuration Menu
Configuration
Menu
Function
Multifunction
display data
Configuration of the multifunction display data that you
wish to see on the instrument panel display ⇒ page 66.
Compass Changing the magnetic region and calibration of the com-
pass. To calibrate the compass, please follow the instruc-
tions given on the instrument panel display.
Convenience Changing vehicle convenience functions ⇒ page 68.
Lights & visi-
bility
Configuration of vehicle lighting ⇒ page 69.
Time Changing the hours and minutes of the instrument panel
clock and the navigation system. The time can be set here
and the choice can be made between the 24 hour and 12
hour display. The S in the upper part of the display indi-
cates that the clock is set to summer time.
Safety First Operating instructions Practical tips Technical Specifications
Loading ...
Loading ...
Loading ...