Loading ...
Loading ...
Loading ...
332 If and when
Fig. 205,
Fig. 206
A B C
Turn signals (small lamp
holder)
Dipped beam head-
lights
Daytime driving light Main beam headlights Side lights
3. Remove the rubber cover on the rear of the headlight.
4.
Rotate the lamp holder
1
to the left all the way
and pull it out back-
wards with the bulb.
Rotate the lamp holder to the left all the way and
pull it out backwards with the bulb.
Press the wire clip down-
wards and pull the lamp
holder
2
out with the
bulb.
Pull the lamp holder
3
out backwards with the
bulb.
5. Depending on the model, the bulb is removed directly from the lamp holder or it may need to be rotated and then removed.
6. Replace the faulty bulb by a new identical bulb.
7. Place the bulb holder in the headlight and rotate to the right all the way.
Place the lamp holder in
the headlight and pull the
wire clip upwards until it
clicks into place.
Place the lamp holder in
the headlight and insert
completely.
8. Insert the rubber cover.
Note
The images show the left hand headlight from behind. The structure of the
right hand side headlight is symmetric.
Loading ...
Loading ...
Loading ...