Seat Alhambra 2012

User Manual - Page 299

For ALHAMBRA 2012.

PDF File Manual, 387 pages, Read Online | Download pdf file

ALHAMBRA 2012 photo
Loading ...
Loading ...
Loading ...
297Wheels and tyres
WARNING (Continued)
Never mount used tyres or wheels if you are not sure of their previous
history. They may be damaged, although the damage is not immediately
visible.
Old tyres, even if they have never been used, may lose air or burst un-
expectedly while driving, resulting in serious accident or damage. If tyres
are over six years old, they should only be used in an emergency and
with extreme caution.
Note
For technical reasons, it is not generally possible to use the wheels from
other vehicles. In some cases, this may also be true for the same model of
wheel. Please refer to the vehicle documentation or ask at a Technical Serv-
ice.
If you decide to fit your vehicle with conventional tyres, remember that
you must carry a puncture repair kit, not available in the tools that come
with the vehicle.
About your tyres and wheels
Fig. 177 Diagram for
changing wheels
The tyres of a vehicle are the components which are subjected to most
stress and are the most underestimated. Tyres are very important, as the
support offered by their narrow surface is the only point of contact between
the vehicle and the road.
The service life of tyres is dependent on tyre pressure, driving style, the care
they receive and the correct fitting.
The tyres and wheel rims are an essential part of the vehicle's design. The
tyres and rims approved by SEAT are specially matched to the characteris-
tics of the vehicle and our critical to good road holding and safe handling.
Avoiding damage to tyres and wheels
If you have to drive over a kerb or similar obstacle, drive very slowly and
as near as possible at a right angle to the kerb.
Inspect the tyres regularly for damage (punctures, cuts, cracks, dents).
Remove any foreign bodies found on the outside of the tread provided
they have not passed through the wall of the tyre ⇒ page 303.
The instructions for tyre control systems should always be observed.
Safety First Operating instructions Practical tips Technical Specifications
Loading ...
Loading ...
Loading ...