Loading ...
Loading ...
Loading ...
201Driving
Optical parking system* (OPS)
Fig. 143 On-screen OPS
display:
A
an obstacle
has been detected in the
collision zone.
B
an ob-
stacle has been detected
in the segment
C
zone
recorded behind the vehi-
cle
Fig. 144 On-screen OPS
display:
A
an obstacle
has been detected in the
segment
B
zone recor-
ded behind the vehicle
The optical parking system is an accessory to the Parking sensor system
⇒ page 200 and the park assist system ⇒ page 203.
The zone recorded by the sensors in front of and behind the vehicle is dis-
played on the factory-fitted radio or navigation system screen. Any obsta-
cles are display in relation to the vehicle ⇒
.
Function Necessary operations
Switching the display
on:
Switch on the parking sensor system ⇒ page 200
or the park assist system ⇒ page 203. The OPS
switches on automatically.
Switching the display
off manually:
Press a zone selection button on the factory-fit-
ted radio or navigation system
OR: Briefly press the function button
or
RVC
on the screen.
Switching the display
off manually:
Drive forwards at more than about 10-15 km/h (6
to 10 mph).
Select the reverse gear on vehicles with rear as-
sist ⇒ page 208. The display changes to the im-
age of the camera.
Zones explored
The zone in which obstacles are recognised runs to a distance of around
120 cm from the front of the vehicle and up to 60 cm to the side
⇒ Fig. 144
B
. Behind the vehicle, the zone analysed reaches a distance of
up to 160 cm and around 60 cm to the sides ⇒ Fig. 143
C
.
Screen display
The image displayed represents the supervised zones in several segments.
As the vehicle moves closer to an obstacle, the segment moves closer to the
vehicle displayed
B
and ⇒ Fig. 144
A
. When the penultimate segment is
displayed, this means that the vehicle has reached the collision zone. Stop
the vehicle!
Safety First Operating instructions Practical tips Technical Specifications
Loading ...
Loading ...
Loading ...