Loading ...
Loading ...
Loading ...
31
INSTALLATION
ENGLISH
Test Run
Check if the range is properly installed and run a test
cycle.
1
Remove all packing materials from inside the oven.
Press Power button located on the display and set
initial settings such as language and time.
(Refer to "Getting Started" in the Operation
section.)
2
Check the operation of the right oven. Select
RIGHT OVEN on the display and the cook mode
screen opens. Select Bake then Start.
3
Check the operation of the left oven. Select LEFT
OVEN on the display. Select Bake then Start.
4
The ovens should finish preheating in 15
minutes.
5
After making sure the ovens operate properly,
turn the temperature in both ovens to 550 °F
(288 °C) and leave the ovens on for at least an
hour. This helps remove any residual oil which
might cause smoke or odor when first using the
ovens.
NOTE
Smoke may come out of the range when it is first
used.
Checking Ignition of the
Surface Burners
Electric Ignition
Select a surface burner knob and simultaneously
push in and turn to the Lite position. You will hear
a clicking sound indicating proper operation of the
spark module.
Once the air has been purged from the supply lines
the burner should ignite within 4 seconds. After the
burner ignites, rotate the knob out of the Lite position.
Try each burner in succession until all burners have
been checked.
Quality of Flames
The combustion quality of the burner flames needs to
be confirmed visually.
A Yellow flames - Call for service.
B Yellow tips on outer cones - This
is normal for LP gas.
C Soft blue flames - This is normal
for natural gas.
NOTE
•
With LP gas, some yellow tipping on outer
cones is normal.
Loading ...
Loading ...
Loading ...