Loading ...
Loading ...
Loading ...
23
INSTALLATION
ENGLISH
Moving the Range
CAUTION
•
Do not lift the range by the oven door’s handle,
as this may damage the door hinges and cause
the door to fit incorrectly.
•
Do not lift the appliance by the range’s control
panel.
•
Rings, watches, and any other loose items
that may damage the unit or otherwise might
become entangled with the unit should be
removed.
•
Hidden surfaces may have sharp edges. Use
caution when reaching behind or under the
appliance.
•
Do not use a hand truck or appliance dolly on
the back or front of the unit. Handle from the
side only.
•
Due to the weight, it is strongly recommended
that a furniture dolly with soft wheels or an air
lift be used to move this unit. The weight must
be supported uniformly across the bottom.
•
All ranges are held to the pallet by (4) brackets
through a wood block
•
To avoid damaging the leveling legs, retract
them before moving the range for service or
cleaning.
1
Remove the two screws on each bracket that
secure the product to the pallet.
2
Remove both oven doors.
NOTE
•
Instructions for removing the oven doors can be
found on page 87.
3
Carefully tilt the range from the side and insert a
dolly under the range to remove the range from
the pallet. Use additional help as required to
remove the product from the pallet. To prevent
damage to the sides of the range, it will be
necessary to pad the corners beneath the straps
on the dolly.
Dolly Straps
Below Oven
4
Transport the range on the furniture dolly close
to its final location, tip the range back to level,
and carefully remove the dolly.
Loading ...
Loading ...
Loading ...