Loading ...
Loading ...
Loading ...
The essentials
Menu Function
Distance
covered
Distance covered in km (m) after
switching on the ignition.
CNG quality
Whenever you refuel the quality of
the natural gas is automatically veri-
fied and is displayed when the igni-
tion is switched on. The display is
made in a percentage of between
70% and 100%. The greater the per-
centage displayed the lower the con-
sumption may be.
Average
speed
The average speed will be shown af-
ter a distance of about 100 metres
has been travelled. Otherwise hori-
zontal lines are displayed. The value
shown is updated approximately ev-
ery 5 seconds.
Digital dis-
play of
speed
Current speed displayed in digital
format.
Speed warn-
ing at ---
km/h or Speed
warning at
--- mph
If the stored speed is exceeded (be-
tween 30 - 250 km/h, or 19 -
155 mph), an audible warning is
given together with a visual warn-
ing.
Detection of
traffic
signs
The traffic signs detected are dis-
played.
Oil tempera-
ture
Updated engine oil temperature dig-
ital display
Menu Function
Coolant tem-
perature
gauge
Digital display of the current temper-
ature of the liquid coolant.
a)
In vehicles with a natural gas engine, range and average con-
sumption refer only to data or natural gas consumption. If you
are in “petrol mode”, the information of both data only appears
on the dash panel and not on the multifunction screen.
Storing a speed with the speed warning
●
Select the display Speed warning at
--- km/h (--- mph)
●
Press the button
on the windscreen
w
iper l
ev
er or the button
on the multifunc-
tion s
t
eerin
g wheel to store the current speed
and activate the warning.
●
To switch system on: adjust to the desired
speed within 5 seconds using the rocker
switch
on the windscreen wiper lever or
b
y
t
urning the thumbwheel on the multifunc-
tion steering wheel. Next, press the button
or
again or wait several seconds.
The s
peed i
s
stored and the warning activa-
ted.
●
To switch system off: press the but-
ton
or
. The stored speed is de-
l
et
ed.
En
gine oil temperature display
Vehicles without multifunction steering
wheel
●
Press the rocker switch ›››
Fig. 43
2
until
the main menu appe
ars. Enter into Journey
data. With the button
2
move to the oil
temperat
ure gauge.
Vehicles with multifunction steering wheel
●
Enter the submenu Journey data and
turn the thumbwheel until the oil tempera-
ture display appears.
The engine reaches its operating temperature
when in normal driving conditions, the oil
temperature is between 80°C (180°F) and
120°C (250°F). If the engine is required to
work hard and the outside temperature is
high, the engine oil temperature can in-
crease. This does not present any problem as
long as the warning lamps
›››
table on
page 42 or
›››
table on page 42 do not
appear on the display.
Additional electrical appliances
●
Operation with the windscreen wiper lever*:
Pr
e
s
s the rocker switch
›››
Fig. 43
2
until the
m
ain menu ap
pe
ars. Enter into the section
Journey data. With the rocker switch,
move to the display Convenience appli-
ances.
36
Loading ...
Loading ...
Loading ...