Loading ...
Loading ...
Loading ...
Emergencies
Note
For LED pilots, you can only change the fog or
rever
se bulb, on the left or right guide.
Fitting the bulb holder
–
Install the bulb holder making sure that
lockin
g clips ››› Fig. 119
A
are properly
clipped on.
–
R
eplace the cover of the rear lid lining
›››
Fig. 118.
Changing number plate light bulbs
Fig. 121 In the rear bumper: number plate
light
.
Fig. 122 Number plate light: Remove the bulb
holder
.
Follow the steps indicated:
1. Press the number plate light in the direc-
tion of
the arr
o
w ››› Fig. 121.
2. Remove the number plate bulb slightly.
3. In the connector lock, turn ››› Fig. 122 to-
wards the arrow
1
and pull the connec-
t
or
.
4.
Rotate the bulb holder in the direction of
arrow
2
and extract it with the bulb.
5. Replace the defective bulb with a new
b
u
l
b with the same features.
6. Insert the bulb holder in the number plate
light and turn in the opposite direction of
arrow
2
until it stops.
7. Plug the connector into the bulb holder.
Note
Depending on how equipped the vehicle is,
the number plat
e lights may be LEDs. LEDs
have an estimated life that exceeds than that
of the car. If a light with LEDs fails, go to an
authorised workshop for replacement.
100
Loading ...
Loading ...
Loading ...