Loading ...
Loading ...
Loading ...
Driver assistance systems
●
T
o r
e
sume control, apply the brake and turn
the lever to position
2
.
WARNING
It is dangerous to activate control and resume
the programmed s
peed if the road, traffic or
weather conditions do not permit this. Risk of
accident!
Setting the distance
Fig. 199 Control lever for: setting the dis-
t
anc
e.
●
To display the distance currently program-
med, briefly
pr
e
ss the rocking button
››› Fig. 199.
●
To increase/reduce the distance one level,
press the rocking button again towards the
left/right. The instrument panel display
modifies the distance between both vehicles.
If the vehicle approaches another vehicle de-
tected in front of it, the ACC reduces the
speed accordingly and then controls the ad-
justed distance. If the vehicle detected in
front accelerates, the adaptive cruise control
will also accelerate up to the target speed
programmed at most.
The greater the speed, the greater the dis-
tance in metres should be ›››
. We recom-
mend the settin
g
Di
stance 3.
WARNING
With regard to distance setting, the driver is
res
ponsible for observing country-specific
legislation.
Message texts
ACC not available
The sy
stem can no longer continue to guar-
antee safe vehicle detection and will be de-
activated. The sensor has lost its setting or is
damaged. Take the vehicle to a specialised
workshop and have the fault repaired.
ACC: currently not available. No sensor vi-
sion
ACC and Front Assist: currently not availa-
ble. No sensor vision
This message will be displayed to the driver if
the radar sensor's vision is impaired due, for
example, to leaves, snow, heavy fog or dirt.
Clean the sensor.
ACC: currently not available. Gradient too
steep
The maximum road slope has been excee-
ded, hence safe ACC operation cannot be
guaranteed. The ACC cannot be switched on.
ACC: only available in D, S or M
Select the D/S or M position on the selector
lever.
ACC: parking brake applied
The ACC is deactivated if the parking brake is
applied. The ACC is available once again after
the parking brake is released.
ACC: currently not available. Intervention
of stability control
The message for the driver is displayed when
the electronic stability control (ESC) inter-
venes. In this case, the ACC is automatically
switched off.
»
193
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...