Loading ...
Loading ...
Loading ...
Operation
Thus adjusted, the detachable ball is ready
f
or in
s
tallation.
CAUTION
The key cannot be removed or turned in the
standb
y position.
Assembling the detachable ball -
Step 1
Fig. 223 Fitting the detachable ball / Release
bo
lt
in the dep
loyed position
Fitting the detachable ball
●
Remove the hook housing cap
4
››› Fig. 219 downw
ards.
●
Set the detachable ball to its standby posi-
tion ›››
page 221.
●
Grip the detachable ball from below
››› Fig. 223 and insert it into the hook hous-
ing following the direction of arrow
1
until it
en
g
ag
es audibly ›››
.
L
ev
er
A
turns aut
omatically in the direction
of
arr
ow
2
upwards, and the release bolt
B
moves outwards (the red and green part will
be
v
i
sible) ›››
.
If
l
ev
er
A
does not turn automatically or the
r
el
e
ase bolt
B
does not come out, the de-
t
ac
h
able ball should be removed by turning
the lever as far as possible downwards from
the housing cavity, and the detachable ball's
support surfaces and the cavity should then
be cleaned.
WARNING
●
When attachin
g the detachable ball, keep
your hands well away from the reach of the
lever's rotation. There is a risk of injuring
your fingers!
●
Never try to pull the lever upwards by force
to turn the key. The detachable ball would not
be secured properly!
Assembling the detachable ball -
St
ep 2
Fig. 224 Locking the lock
Fig. 225 Placing the cover over the lock.
Do not omit this first step ›
›
›
page 222, As-
sembling the detachable ball - Step 1 !
●
Turn key
A
in the direction of arrow
1
un-
ti
l
the p
art of the key with the holes reaches
the bottom position ››› Fig. 224.
222
Loading ...
Loading ...
Loading ...