Loading ...
Loading ...
Loading ...
Operations
English 45
Delay End
You can set the washer to nish your wash automatically at a later time by choosing a
delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the
time the wash will nish.
1. Select a cycle. Then, change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press Start/Pause.
The
indicator turns on with the clock running.
4. To cancel Delay End, restart the washer by pressing Power.
Real-life case
You want to nish a two-hour cycle 3 hours from now. To do this, you add the Delay End
option to the current cycle with a 3-hour setting, and then press Start/Pause at 2:00 p.m.
The washer starts operating at 3:00 p.m. and ends at 5:00 p.m. Provided below is the time
line for this example.
2:00 pm
Set the Delay End to 3 hours
3:00 pm
Start
5:00 pm
End
Steam (only for WF45K6500A* model)
With the Steam cycle, the washer senses the weight of the load and controls the steam
effect according to the load size. This improves washing performance.Available Steam
cycles are: NORMAL, HEAVY DUTY, BEDDING, WHITES, SANITIZE, ALLERGEN, and DEEP
STEAM.
1. Turn the Cycle Selector to select a Steam cycle.
2. Press Steam.
3. Add detergent and fabric softener as instructed.
4. Press Start/Pause to start the cycle.
NOTE
• Steam may not be visible or present during the cycle. This is normal.
• Unlike other Steam cycles, you don’t need to press Steam for DEEP STEAM as the Steam
function turns on automatically.
WF45K6500AV_DC68-03665A-02_EN.indd 45 2016/8/12 14:38:01
Loading ...
Loading ...
Loading ...