Loading ...
Loading ...
Loading ...
Frequently Asked Questions
82
Exchanging the elbow connec‐
t
or
If you can prepare only hot milk instead
of milk fr
oth, check the following first:
– Is the milk in the milk flask cold
(< 50°F / 10°C)?
– Have the main dispenser and milk
flask li
d been cleaned carefully?
– Is the main dispenser correctly
mou
nted?
If you still cannot prepare milk froth, fol‐
low the st
eps described to exchange
the elbow connector.
You need the elbow connector that was
pr
ovided as a spare part.
Do not use a needle or similar imple‐
ment. This would damage the com‐
ponents.
Open the ser
vice cover on the back
of the appliance door.
Fi
rst release air intake tube from
the opening Then pull off the el‐
bow connector .
P
ull both tubes out of the elbow con‐
nector.
Use the cleaning brush supplied to
clean air intake tube under running
water. "Blowing through" can help to
dislodge blockages.
Inser
t the brush in milk tube . Move
the brush back and forth as far as
possible until all milk deposits have
been removed.
No
w take the new elbow connector
(you can throw away the old elbow
connector in the household trash).
Loading ...
Loading ...
Loading ...