Loading ...
Loading ...
Loading ...
14
OPERATING INSTRUCTIONS
Before using the cooktop for the first time, clean it
thoroughly with the included cleaner or ceramic
cooktop cleaner according to the Care and
Cleaning instructions in this guide. This will remove
any help protect the ceramic surface and make
future cleanup easier.
To operate the touch control pads, touch the pad
firmly with the flat part of your fingertip.
FIRST OPERATION
The first time that power is supplied to the cooktop,
will flash in the display for each cooking zone
for 60 seconds or until the POWER pad is touched
for approximately 2 seconds.
NOTE: will also flash when power is restored
after a power outage.
ACTIVATING THE COOKTOP
To turn on the cooktop, touch the POWER
pad for approximately 2 seconds. The
indicator above the pad will light.
SELECTING THE COOKING ZONE
To select the desired Cooking Zone, press
the ON/OFF pad. The display for the
selected Cooking Zone will show and
and an indicator will light to indicate that the
Cooking Zone is on but no power level is set.
NOTE: Once the Cooking Zone has been selected
with the ON/OFF pad, the power level must be
selected within 5 seconds with the or pad.
Otherwise, the Cooking Zone will turn off for safety
reasons.
NOTE: After turning on the cooktop with the
POWER pad, you must select one of the Cooking
Zones within 20 seconds using the Cooking Zone
ON/OFF pad(s). If no selection is made, the
cooktop will turn off for safety reasons.
BEFORE USING THE COOKTOP
SETTING THE CONTROLS
CAUTION
Never use scrub pads or abrasive cleaners. They
can cause permanent damage to the cooktop
surface.
Loading ...
Loading ...
Loading ...