Loading ...
Loading ...
Loading ...
Before You Call 45
Soil not completely removed after
fresh clean.
• Fresh clean was interrupted. Review “Fresh Clean” on page 35.
• Excessive spills on oven bottom. Clean before starting fresh clean.
• Failure to clean soil from the oven frame, the door liner outside the oven door gasket,
and the small area at the front center of the oven bottom. These areas are not in the
fresh cleaning area, but they get hot enough to burn on residue. Clean these areas
before starting the fresh clean cycle. Burned-on residue can be cleaned with a stiff nylon
brush and water or a nylon scrubber. Be careful not to damage the oven gasket.
Appliance is not level. • Poor installation. Place oven rack in center of oven. Place a level on the oven rack.
Adjust leveling leg at base of appliance until the oven rack is level.
• Kitchen cabinet alignment may make oven appear not level. Be sure cabinets are
square and have sufficient room for appliance clearance.
• Cabinets not square or are built in too tightly. Contact builder or installer to make
appliance accessible.
Fan noise occurring after the oven is
turned off.
• Some models are equipped with a cooling fan that runs during the cooking process to
cool internal electronic components. It is normal for this fan to continue to run for an
extended period of time, even when the oven is off.
Loading ...
Loading ...
Loading ...